Welcome to the world of microbes-a brand new product line and technology for your comprehensive water quality program. Count the E. coli and coliforms in your favorite swimming hole.

Use for ponds, streams, rivers, lakes, ocean water, tap water. patented combination of color-producing nutrients and enzymes that mark E. coli purple-blue, coliforms pink, and other non-coliform bacteria colorless easy method of teaching and conducting microbiology testing eliminates need for autoclave, water bath, and balance saves preparation time all materials supplied except water sample science activities available adds valuable quantitative capability EPA approved for outdoor surface water monitoring (ColiQuant EZ) and potable water (ColiQuant MF)

• EPA Approved Method for E. Coli Determination
• The COLISCAN� MEMBRANE FILTER METHOD Developed for ESCHERICHIA COLI AND TOTAL COLIFORMS
• USEPA Approved for the determination of E. coli and total coliforms for use in National Primary Drinking Water regulations (NPDWR) monitoring.
• 1.0 Scope and Application
• 1.1 The Coliscan� Membrane Filter method consists of a medium which detects the presence or absence of E. coli and total coliforms simultaneously and also allows the enumeration of each. It is approved for use in analyzing potable water by certified drinking water laboratories. It is also useful in the analysis of other waters, clinical applications, veterinary and agricultural applications, pharmaceutical applications and in the area of food and beverages.
• 1.2 The method allows the detection and enumeration of E. coli and other coliforms in 24 hours or less and does not require a confirmation step.
• 1.3 The detection limit is one target CFU/sample.
• 2.0 Summary of the Method
• 2.1 The Coliscan� MF medium determines the presence or absence (and enumeration) of E. coli and other coliforms in any size water sample (100 mL is required for drinking water). The sample (diluted or not) is passed through a 0.45um pore size, 47 mm diameter membrane filter using standard equipment and methodology. The filter is then placed into a 50 mm plate containing a pad saturated with the medium (if in broth form) or a layer of the medium which has been solidified with an added agar gelling agent. Incubate for 24 hr at 35�C�0.5�C. E. coli CFUs will appear as blue/purple and other coliform CFUs will appear pink/magenta.
• 2.2 Coliscan� MF medium (broth or agar) contains nutrients to assure the growth of the target organisms, buffers to maintain appropriate pH, and inhibitors to reduce the growth of nontarget organisms. It is similar to the modification of m-TEC described by Duncanson and Cabelli (1986 paper presented at the National Meeting of AWWA). E. coli colonies growing on the medium appear blue to purple due to the combination of the enzymes glucuronidase and galactosidase affecting their respective substrates, 5-Bromo-4-Chloro-3-Indolyl-B-D-glucuronide (X-gluc) and 6-Chloro-3-Indolyl-B-D-galactoside (Red-Gal�). The teal green product of X-gluc hydrolysis combines with the pink/magenta product of the Red-Gal� hydrolysis to produce the blue to purple appearance of the E. coli colonies. Other coliform colonies (than E. coli) are colored pink/magenta as a result of producing only the galactosidase which acts on the Red-Gal� only.
• 3.0 Definitions
• 3.1 Escherichia coli - Those bacteria which grow as blue/purple colonies on the Coliscan� MF medium as a result of the production of both glucuronidase and galactosidase enzymes. These bacteria are of fecal origin.
• 3.2 Total Coliforms - Those bacteria which make up the sum of the E. coli (blue/purple colonies) and other coliforms. The other coliforms will appear as pink/magenta colonies on the Coliscan� MF medium because they produce galactosidase, but not glucuronidase and so cleave only the Red-Gal� substrate. Species of the genera Citrobacter, Enterobacter, Escherichia, and Klebsiella are the main groups (other than Escherichia) of coliform bacteria.
• 3.3 Non Coliforms - Bacteria that form colonies which are not blue/purple or pink/magenta on Coliscan� MF medium.
• 4.0 Interferences
• 4.1 No known chemical substances normally encountered in drinking water or source waters have been observed to affect the color of E. coli or other coliform colonies on the Coliscan� MF medium. If particulate or colloidal materials are suspended in water samples, they may interfere with filtering efficiency by clogging filter pores and they may cause some spreading of bacterial colonies as they grow on the filter surface during incubation. However these materials would very rarely prevent the accurate determination of the bacterial population.
• 4.2 Colonies exhibiting the color(s) of the target organisms should not be included in the E. coli or other coliform counts if they are less than 0.5 mm diameter (except when the entire colony population is small due to excessive crowding on the plate. In such a case the sample should be rerun at a higher dilution.). Small colored colonies of this nature should not be counted unless they are isolated into pure culture and then verified by approved procedures.
• 4.3 Colonies exhibiting a teal green color which is indicative of the production of glucuronidase without the production of galactosidase should not be counted as E. coli without isolation into pure culture and verification by approved procedures.
• 4.4 It can not be safely assumed that colonies can be picked directly from the surface of the filter and used to inoculate confirmatory media directly, particularly if the colonies are blue/purple or teal green, as they may be contaminated by cells from adjoining colonies that have traveled on the filter surface. Therefore, questionable colonies should be picked and streaked onto the surface of a differential medium such as Coliscan� Easygel� to ensure their purity before further testing.
• 4.5 Unlike media which utilize a fluorogen (such as MUG or MUGal) and a chromogen, where the fluorogen tends to diffuse rapidly into the surrounding medium, thus making the timing of reading the test results critical (before excessive diffusion occurs which may make neighboring colonies appear as false positives), the chromophores of the chromogens used in Coliscan� MF are quite insoluble and little or no diffusion away from the target colonies occurs.
• 5.0 Safety
• 5.1 Standard safety practices should be observed by persons using these materials in the laboratory.
• 5.2 Any materials containing living or viable microbes should be disinfected or sterilized by accepted standard methods before being discarded.
• 5.3. Refer to the MSDS for specific product information.
• 6.0 Equipment and supplies
• 6.1 Incubator set at 35�C�0.5�C with provision for maintaining materials at above 80% humidity.
• 6.2 Filter funnel apparatus for 47 mm membrane filters, with a vacuum source.
• 6.3 Dissecting microscope (10-15X) with built-in light sources.
• 6.4 Sterile disposable or properly cleaned (by well known standard methods) glass or plasticware including 1 and 10 mL pipettes, sample collection containers, flasks, graduated cylinders, and diluent containers.
• 6.5. Sterile forceps
• 6.6 Sterile 50 mm diameter petri dishes with absorbent pads
• 6.7 Sterile 0.45�m pore size, 47 mm diameter micropore filters for sample filtering
• 6.8 Sterile Dilution and Rinse water prepared in accordance with standard methods.
• 6.9 Biohazard bag
• 7.0 Reagents and Standards
• 7.1 Coliscan� MF medium of Micrology Laboratories LLC is provided in a broth for using 2 mL/dish, or it may be obtained in dehydrated agar based form. The media are provided without the cefsulodin antibiotic (for the elimination of some non-target organisms). The medium should be kept frozen (2-6�C) and has an expiration time of 6 months.
• 7.2 Preparation of the Medium for use: The broth medium should be thawed and freshly prepared cefsulodin solution should be added so that the cefsulodin concentration equals 5 �g/mL of medium. The prepared medium can be kept refrigerated for up to 2 weeks.
• The agar medium should be mixed with reagent-grade water according to instructions and autoclaved for 15 min/15 lb pressure, tempered to below 80� C and then freshly prepared cefsulodin solution should be added (5�g/mL of medium). The medium should then be dispensed into 50 mm petri dishes (5 mL/dish). Store at 4�C for up to 2 weeks.
• 7.3 Preparation of the Cefsulodin solution: For Coliscan� MF broth, pure cefsulodin is provided in a sterile tube to which 10 mL of sterile reagent-grade water (provided) is added. Shake until the cefsulodin is completely dissolved and dispense 0.5 mL of this solution into each 20 mL bottle of Coliscan� MF broth.
• For Coliscan� agar medium, pure cefsulodin is provided in a sterile tube to which 10 mL of sterile reagent-grade water (provided) is added. Shake until the cefsulodin is completely dissolved and dispense the 10 mL aliquot into 1 liter of hot liquid autoclaved (tempered) Coliscan� agar, mix well and dispense into 50 mm petri dishes (5 mL/dish).
• Cefsulodin solutions will be sterile if carefully prepared to avoid the introduction of contaminating microbes. The prepared media should be affirmed as sterile by incubating a control plate of each lot and verifying no growth.
• If operators prefer, they can filter sterilize their cefsulodin solutions to ensure sterility, but testing the prepared medium with a control is still recommended.
• 7.4 Make a 10% solution of sodium thiosulfate using reagent-grade water.
• 8.0 Sample collection, Dechlorination, Preservation, Shipment and Storage 8.1 Collect samples in a sterile, clean wide mouth glass or heat resistant plastic bottle with a leakproof closure, all of which is non-toxic in use. A presterilized, sealable, non-toxic plastic bag may also be used for sample collection.
• 8.2 For potable water, open the tap and allow the water to run for 2-3 minutes and then collect the sample using aseptic technique to avoid contamination. For other sample types, aseptically collect water that is representative of the source.
• 8.3 Samples with residual chlorine should be neutralized at the time of collection by adding 1 mL of a 10% solution of sodium thiosulfate (or the equivalent) per liter of sample.
• 8.4 Samples should be tested as soon as possible after collection. If processing is not done within 1 hour, the sample should be held on ice or refrigerated at 2-8�C. Potable water samples should be tested or processed within a maximum holding time of 30 hours of collection and non-potable samples should be tested or processed within a maximum holding time of 8 hours of collection.
• 9.0 Quality Control
• 9.1 Coliscan� MF is tested for quality control at the time of manufacture and is certified to meet specifications. Each lot should be tested by the using laboratory by preparing three plates of the medium, one to serve as a positive control, one to serve as a negative control, and one to serve as an uninoculated control.
• Prepare 24 hour tryptone broth cultures of typical E. coli, Enterobacter aerogenes or Klebsiellsa pneumonia, and Pseudomonas aeruginosa or Salmonella typhimurium. Prepare serial dilutions of E. coli and Enterobacter or Klebsiella combined so that the combined inoculum will result in 20-80 CFU/100 mL and filter. Place the filter on the surface of one of the plates of Coliscan� MF medium. Prepare serial dilutions of the Pseudomonas or Salmonella so that the inoculum will result in 20-80 CFU/100 mL and filter. Place the filter on the surface of the second plate of Coliscan� MF medium. Filter 100 mL of sterile diluent and place the filter on the surface of the third plate of Coliscan� MF medium. Use sterile filter apparatus for each prep.
• Incubate the plates 24 hr. at 35�C�0.5�C. The E. coli/Enterobacter or Klebsiella control should have both blue/purple (E. coli) and pink/magenta (Enterobacter or Klebsiella) colonies, the Pseudomonas or Salmonella control should have colorless colonies, and the diluent blank control should have no colonies.
• Colonies from the controls may be picked and tested further with various diagnostic media if desired.
• 10.0 Calibration and Standardization
• 10.1 Coliscan� MF calibration or standardization is not required.
• 10.2 Incubators should be tested daily to assure maintenance of proper temperature. Thermometers used should be tested at least annually against an NIST certified thermometer.
• 11.0 Procedure
• 11.1 Test Procedure
• 11.1.2 Using proper technique, filter the sample through a 47 mm, 0.45�m pore size membrane filter. Rinse the filter funnel twice with at least 20 mL of sterile diluent/rinse to complete the filtration. Transfer the filter to a petri dish containing a pad saturated with 2 mL of the Coliscan� MF broth, invert the dish and incubate at 35�C�0.5�C for 24 hours.
• 11.2 Interpretation
• 11.2.1 Check the filters for colony forming units. Generally, colonies are obvious and can be observed with the unaided eye in normal room or daylight. However, the use of a 10-15X magnifying device is recommended for critical analysis.
• 11.2.2 The sum of blue/purple and pink/magenta colonies is the Total Coliform Positive count. Blue/purple colonies are counted as E. coli. Pink/magenta colonies are counted as other than E. coli coliforms. Clear or white colonies are counted as non-coliforms.
• 12.0 Data Analysis, Calculation, Interpretation and Reporting Results
• 12.1 Presence/Absence Test
• 12.1.1 The presence of at least one blue/purple or pink/magenta colony at least 0.5 mm in diameter indicates the sample is total coliform positive. The presence of at least one blue/purple colony indicates the sample is positive for E. coli. The presence of at least one pink/magenta colony indicates the sample is positive for general coliforms.
• 12.2 General Coliform (excludes E. coli) - Quantitative Test
• 12.2.1 Count the number of pink/magenta CFUs present on the membrane filter and record as the number/amount of sample used for that test. For example, if the amount of sample was 10 mL and there were 20 pink CFUs, record as 20 per 10 mL. Then translate to the number of CFUs/100 mL. In this case, the 10 mL sample is 0.1 of 100, so the 20 CFUs should be multiplied X10, giving 200 CFU/100 mL sample. All pink/magenta CFUs should be counted as general coliforms. (Colonies should be at least 0.5 mm diameter to be counted.)
• 12.3 E. coli (Fecal) - Quantitative Test
• 12.3.1 Count the number of blue/purple CFUs present on the membrane filter and record as the number of E. coli/amount of sample used for that test. Then translate to the number of E. coli CFUs/100 mL of sample (see 12.1.1). All blue/purple CFUs should be counted as E. coli. (Colonies should be at least 0.5 mm diameter to be counted.)
• 12.4 Total Coliforms - Quantitative Test
• 12.4.1 The sum of the number of general coliform CFUs and the number of E. coli CFUs from one sample equals the number of total coliforms in that sample. That is, the total number of pink/magenta CFUs and blue/purple CFUs = the total coliforms for that sample.
• 13.0 Method Performance Characteristics
• 13.1 Specificity - In a study done to compare Coliscan�MF to the m-TEC Method for the detection and enumeration of E. coli from disinfected wastewater effluent, the false positive error was 3.8% and the false negative error was less than 1.0%. That is, of 105 CFUs judged to be E. coli (blue/purple) which were picked and subjected to Enterotube� analysis, only 4 were identified as other than E. coli. And of 131 CFUs judged to be coliforms other than E. coli (pink/magenta) which were picked and subjected to Enterotube analysis, only 1 was identified as other than a true coliform.
• 13.2 Comparability - The Pearson Coefficient for the parallel analyses on the Coliscan�MF and the m-TEC methods within the same laboratory was 0.928. T- test analyses indicated no significant differences between the methods at the 95% confidence level.
• 13.3 The membrane filter medium known as MI Agar was developed by the USEPA and was approved for use with drinking water as stated and published in the Federal Register Vol. 64, No. 230, Dec. 1, 1999. On the basis that the Coliscan MF� medium is based upon very similar, equally effective technology, the EPA has granted it official approval for the determination of total coliforms and E. coli for use in drinking water monitoring also. The EPA reported the false-positive and false- negative rates for E. coli to both be 4.3% with the MI Agar method. The specificities for E. coli and total coliforms were reported to be 95.7% and 93.1%, respectively. Because of the parallels in the methodology between the MI Agar and the Coliscan�MF, testing results should be the same for both media.
• 14.0 Pollution Prevention
• 14.1 Laboratory personnel should use pollution control techniques to minimize waste generation wherever possible. Where this is not possible at the source, recycling should be practiced.
• 15.0 Waste Management
• 15.1 Each laboratory is responsible to comply with all federal, state and local regulations governing waste management. Special emphasis should be placed on hazardous waste identification rules and land disposal restrictions and to protecting the air, water, and land by minimizing and controlling all release from fume hoods and bench operations. Compliance is also required with any sewerage discharge permits and regulations. Federal, state or local authorities should be contacted for further specific information.
• 16.0 References
• 16.1 APHA (1995) Standard Methods for the Examination of Water and Wastewater. Edition 19.
• 16.2 Brenner, K.P., et al. (2000) Membrane Filter Agar Medium Containing Two Enzyme Substrates Used for the Simultaneous Detection of Total Coliforms and E. coli. United States Patent #6,063,590.
• 16.3 Brenner, K.P., et al. (1993) New Medium for the Simultaneous Detection of Total Coliforms and Escherichia coli in Water. Appl. Environ. Microbiol. 59: 3534-3544.
• 16.4 Roth, J.N., W.J. Ferguson. (1993) Method Test Media and Chromogenic Compounds for Identifying and Differentiating General Coliforms and Escherichia coli Bacteria. United States Patent #5,210,022.
• 16.5 Umble, A.K., et al. (1999) Elkhart, Ind., Tests an Improved, Simplified Membrane Filtration Method for Escherichia coli Detection and Enumeration. Water Environment Tech. Vol.11, No.4, 57-59.
• 16.6 USEPA. National primary and secondary drinking water regulations: Analytical methods for regulated drinking water contaminants: Proposed rule, F6. Federal register 58(129): 65626. Wash., D.C., Office of the Federal Register. Dec. 15, 1993.
• 16.7 USEPA. National primary drinking water regulations: Analytical methods for certain pesticides and microbial contaminants: 40 CFR Part 141. Federal register Vol. 63, No. 147, July 31, 1998. Proposed rules.
• MICROLOGY LABORATORIES LLC 1-888-327-9435 www.micrologylabs.com